気になる含水率計 KC-318

以前、針のない含水率計 MD918 を買って試したことがあります。

結論から書くと、製材された表面が平滑な対象でないとうまく測定できなくて、薪では正しい数字が得にくく、薪の乾燥具合を知る目的には不適格 ということがわかったのですが、別のタイプのもの KC-318 と書かれている機種を見かけました。

eBay で検索してみると、$40 弱で売られています。

まあ、eBay で買ったことがある人ならわかると思いますが、チャイニーズが出品者の場合、届くまでに異様に時間がかかったり、書いてあるものと届くものが違っていたり、届きもしない、なんて言うトラブルが 1/3 位の頻度で発生するので、そういうコストも考えておかないといけないのですが、まあ、$1 = 150 とすると、だいたい 6,000 円くらい、ということろでしょうかね。

This ideal tool measures moisture content without damaging the material that being tested. It emits and picks up electro-magnetic signals through the material to be tested. The reading displayed is an average value of the moisture content from the entire surface area and the maximum depth of penetration. Moisture which is closer to the surface has a greater effect on the average value than the moisture close to the maximum depth of penetration.

Internally, it checks and adjust the calibration of the unit, therefore manual calibration is no longer necessary. Readings maybe inaccurate when the sensor is place on wood with the thickness less than the maximum depth. Maximum depth of the sensor reading is 3/4 inch (20mm). LED indicates the moisture content simultaneously when the reading is shown on screen.

Ideal use for wood / timber industry, building material storage drywall, fabric and paper.

Features:

Detect Moisture of 4 different materials (drywall, masonry, softwood, hardwod)
Audio Alarm if reading is out of range
Moisture display on LCD and LED bars
Auto calibration
Data hold function : Lock readings
Green backlight
Measure moisture without damaging the surface
Low battery indicator
Auto power off

Specifications:

Type : Non-Invasive Inductive Moisture Meter
Measurement Range : 0%~53% ( Softwood ) ; 0%~35% ( Hardwood )
Moisture readings of drywall and masonry are relative values
Measurement Precision : ±4% (Softwood, Hardwood)
Maximum Sense Depth : 3/4 inch (20mm)
Power source : 1 x 9V Battery
Auto power Off : 2 minutes inactive
LED Moisture Content Indicator
Working Temperature : 0 ~ 40°C
Storage Temperature : -10 ~ 50°C
Storage humidity : 5% ~ 95% RH
Dimension : 170 x 75 x 30mm
Weight : About 150g

Set includes

1 x Digital Non-Invasive Inductive Moisture Meter
1 x English User’s Manual
1 x 9V battery
Blister packaging

能書きは上記のようになっていて、Maximum Sense Depth : 3/4 inch (20mm) ということですので、ある程度離れても測れますよ、というとなのかしら、という気はするのですが、写真で見る限り、センサ部はおそらく MD918 と同等の形状をしていると思われますから、その物理的な形状から、凹凸が大きな薪の含水率を正確に測れるのか、ということに関してはかなり不安を覚える状態で、人柱として買うには、ちょっと高すぎる値段です。

それはそうと、最近驚いたのは、9V の角型電池を使うタイプの含水率計でお客さんから、日本の電池ですか、と尋ねられたことです。
めったに見なくなりましたね。

買うかどうかはさておき、とりあえず、ブログにでも書いておかないと忘れてしまうので、備忘録代わりのエントリーでした。